Product catalogue / 04

Fuel Tanker Vapour Recovery Equipment

Vapour collection and return on fuel tankers. Coordinate valve sequencing, nominal bore and recovery-line connections.

19 traceable product codes

Product models and configurations

SIMEI FT-VR-100 — 80 mm vapour recovery valve with manual override

SIMEI FT-VR-100

80 mm vapour recovery valve with manual override

Controls vapour flow in the tanker vapour-recovery pipework during loading and unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Pneumatic actuation with manual opening when an air supply is unavailable.
Internal shaft components and springs are stainless steel 304.

Available Configurations

Fire screen
Manual opening lever
Pneumatic opening and serial-control fittings
Flange gasket

Technical & Ordering Data

Nominal size	80 mm
Operation	Pneumatic and manual
Body material	Aluminium alloy, oxidation-treated
Internal shaft parts and springs	Stainless steel 304
Working pressure	Confirm before quotation
Temperature range	Confirm before quotation
Seal material	Confirm before quotation
Flange outer / pitch-circle diameters	152 / 130 mm
Flange holes	8 × Ø11, equally spaced
Other drawing references	79; 163; Ø92 mm

80 mm vapour recovery valve with manual override — Fire screen — Fire screen

80 mm vapour recovery valve with manual override — Manual opening lever — Manual opening lever

80 mm vapour recovery valve with manual override — Pneumatic opening and serial-control fittings — Pneumatic opening and serial-control fittings

80 mm vapour recovery valve with manual override — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm vapour recovery valve with manual override — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Air supply pressure, connection thread and seal material.
Verify the meaning of the 79 mm and 163 mm reference dimensions.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-110 — 80 mm serial-control vapour recovery valve

SIMEI FT-VR-110

80 mm serial-control vapour recovery valve

Controls vapour flow in the tanker vapour-recovery pipework during loading and unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Serial pneumatic control can open the next valve in sequence from the current valve.
Internal shaft components and springs are stainless steel 304.

Available Configurations

Fire screen
Serial-control fittings
Flange gasket

Technical & Ordering Data

Nominal size	80 mm
Operation	Pneumatic serial control
Body material	Aluminium alloy, oxidation-treated
Internal shaft parts and springs	Stainless steel 304
Working pressure	Confirm before quotation
Temperature range	Confirm before quotation
Seal material	Confirm before quotation
Flange outer / pitch-circle diameters	152 / 130 mm
Flange holes	8 × Ø11

80 mm serial-control vapour recovery valve — Fire screen — Fire screen

80 mm serial-control vapour recovery valve — Serial-control fittings — Serial-control fittings

80 mm serial-control vapour recovery valve — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm serial-control vapour recovery valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Operating air pressure and all order-specific dimensions.
Any required European-standard or ADR conformity must be supported by documentation for the supplied SIMEI product.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-120 — 80 mm serial-control vapour recovery valve

SIMEI FT-VR-120

80 mm serial-control vapour recovery valve

Controls vapour flow in the tanker vapour-recovery pipework during loading and unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Serial pneumatic control can open the next valve in sequence from the current valve.
Internal shaft components and springs are stainless steel 304.

Available Configurations

Fire screen
Serial-control fittings
Flange gasket

Technical & Ordering Data

Nominal size	80 mm
Operation	Pneumatic serial control
Body material	Aluminium alloy, oxidation-treated
Internal shaft parts and springs	Stainless steel 304
Working pressure	Confirm before quotation
Temperature range	Confirm before quotation
Seal material	Confirm before quotation
Drawing references	128; Ø92; Ø93; 165 mm
Fixing holes	4 × Ø11

80 mm serial-control vapour recovery valve — Fire screen — Fire screen

80 mm serial-control vapour recovery valve — Serial-control fittings — Serial-control fittings

80 mm serial-control vapour recovery valve — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm serial-control vapour recovery valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Connection type and final flange layout; the source text does not state a threaded installation for this model.
Confirm small drawing annotations before manufacture.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-130 — 80 mm threaded serial-control vapour recovery valve

SIMEI FT-VR-130

80 mm threaded serial-control vapour recovery valve

Controls vapour flow in the tanker vapour-recovery pipework during loading and unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Serial pneumatic control can open the next valve in sequence from the current valve.
Internal shaft components and springs are stainless steel 304.
Threaded installation is described as easy to fit.

Available Configurations

Fire screen
Serial-control fittings

Technical & Ordering Data

Nominal size	80 mm
Connection	Threaded; exact standard to confirm
Operation	Pneumatic serial control
Body material	Aluminium alloy, oxidation-treated
Internal shaft parts and springs	Stainless steel 304
Working pressure	Confirm before quotation
Temperature range	Confirm before quotation
Seal material	Confirm before quotation

80 mm threaded serial-control vapour recovery valve — Fire screen — Fire screen

80 mm threaded serial-control vapour recovery valve — Serial-control fittings — Serial-control fittings

Confirm Before Order

Thread standard, engagement length, working pressure and air supply.

Engineering Note

The catalogue provides a photograph and fitting details but no dedicated dimensional drawing for this valve.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-140 — 100 mm vapour recovery adaptor valve with sight glass

SIMEI FT-VR-140

100 mm vapour recovery adaptor valve with sight glass

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Sight glass permits observation of the internal working condition.

Available Configurations

Pneumatic interlock valve
Sight glass
Flange gasket

Technical & Ordering Data

Nominal size	100 mm
Body material	Aluminium alloy
Connection	Flanged
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	200 mm
Flange outer / pitch-circle diameters	173 / 150 mm
Fixing holes	8 × Ø11

100 mm vapour recovery adaptor valve with sight glass — Pneumatic interlock valve — Pneumatic interlock valve

100 mm vapour recovery adaptor valve with sight glass — Sight glass — Sight glass

100 mm vapour recovery adaptor valve with sight glass — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery adaptor valve with sight glass — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-150 — 80 mm threaded serial-control vapour recovery valve

SIMEI FT-VR-150

80 mm threaded serial-control vapour recovery valve

Controls vapour flow in the tanker vapour-recovery pipework during loading and unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Serial pneumatic control can open the next valve in sequence from the current valve.
Internal shaft components and springs are stainless steel 304.
Threaded installation is described as easy to fit.

Available Configurations

Fire screen
Serial-control fittings

Technical & Ordering Data

Nominal size	80 mm
Connection	Threaded; exact standard to confirm
Operation	Pneumatic serial control
Body material	Aluminium alloy, oxidation-treated
Internal shaft parts and springs	Stainless steel 304
Working pressure	Confirm before quotation
Temperature range	Confirm before quotation
Seal material	Confirm before quotation
Section drawing references	Ø92; 28 mm

80 mm threaded serial-control vapour recovery valve — Fire screen — Fire screen

80 mm threaded serial-control vapour recovery valve — Serial-control fittings — Serial-control fittings

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm threaded serial-control vapour recovery valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Thread standard and engagement length.
Confirm section-drawing flange diameter annotations before manufacture.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-160 — 80 mm combing vent valve

SIMEI FT-VR-160

80 mm combing vent valve

Normally open vent installed at the end of the pipework on top of the tanker. It allows vapour to enter and leave the pipework and closes through the vapour-adaptor interlock during loading or unloading.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Stainless-steel internal parts improve corrosion resistance.
Lightweight aluminium-alloy construction.
The downward outlet is set at 45° to the horizontal to reduce dust accumulation or entry.
Interlocks with the vapour adaptor: the combing vent should close when the adaptor valve opens.

Available Configurations

Pneumatic interlock with the vapour adaptor
Tanker system layout with vapour vent, pipework, combing vent, vapour adaptor, API adaptor and bottom valve

Technical & Ordering Data

Nominal size	80 mm / 3 inch
Working pressure	0.4 MPa
Body material	Aluminium alloy
Internal material	Stainless steel; grade not stated
Installation	Flanged
Operation	Pneumatic; normally open
Temperature range	−40°C to +50°C
Seal material	Confirm before quotation
Drawing diameters	Ø90; Ø100; Ø156; Ø130 mm
Fixing holes	4 × Ø11
Other drawing references	75; 100 mm

Dimensions & Construction (2)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm combing vent valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

80 mm combing vent valve — Tanker arrangement: 1 vapour vent; 2 vapour pipe; 3 combing vent; 4 vapour adaptor; 5 API adaptor; 6 bottom valve. — Tanker arrangement: 1 vapour vent; 2 vapour pipe; 3 combing vent; 4 vapour adaptor; 5 API adaptor; 6 bottom valve.

Confirm Before Order

Interlock circuit logic, air supply pressure and final flange dimensions.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-170 — 100 mm vapour recovery adaptor valve with sight glass

SIMEI FT-VR-170

100 mm vapour recovery adaptor valve with sight glass

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Sight glass permits observation of the internal working condition.

Available Configurations

Pneumatic interlock valve
Sight glass
Flange gasket

Technical & Ordering Data

Nominal size	100 mm
Body material	Aluminium alloy
Connection	Flanged
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	175 mm
Flange outer / pitch-circle diameters	173 / 150 mm
Fixing holes	8 × Ø11

100 mm vapour recovery adaptor valve with sight glass — Pneumatic interlock valve — Pneumatic interlock valve

100 mm vapour recovery adaptor valve with sight glass — Sight glass — Sight glass

100 mm vapour recovery adaptor valve with sight glass — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery adaptor valve with sight glass — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-180 — 100 mm vapour recovery adaptor valve with sight glass

SIMEI FT-VR-180

100 mm vapour recovery adaptor valve with sight glass

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Sight glass permits observation of the internal working condition.

Available Configurations

Pneumatic interlock valve
Sight glass
Flange gasket

Technical & Ordering Data

Nominal size	100 mm
Body material	Aluminium alloy
Connection	Flanged
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	203 mm
Flange outer / pitch-circle diameters	170 / 150 mm
Fixing holes	8 × Ø11

100 mm vapour recovery adaptor valve with sight glass — Pneumatic interlock valve — Pneumatic interlock valve

100 mm vapour recovery adaptor valve with sight glass — Sight glass — Sight glass

100 mm vapour recovery adaptor valve with sight glass — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery adaptor valve with sight glass — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-190 — 100 mm vapour recovery adaptor valve

SIMEI FT-VR-190

100 mm vapour recovery adaptor valve

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Cast aluminium-alloy main body with stainless-steel internal shaft components.

Available Configurations

Pneumatic interlock valve
Flange gasket

Technical & Ordering Data

Nominal size	100 mm
Body material	Aluminium alloy
Connection	Flanged
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	176 mm
Flange outer / pitch-circle diameters	170 / 150 mm
Fixing holes	8 × Ø11

100 mm vapour recovery adaptor valve — Pneumatic interlock valve — Pneumatic interlock valve

100 mm vapour recovery adaptor valve — Flange gasket — Flange gasket

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery adaptor valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-200 — 80 mm vapour recovery adaptor valve

SIMEI FT-VR-200

80 mm vapour recovery adaptor valve

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Cast aluminium-alloy main body with stainless-steel internal shaft components.
Internal threaded installation; a threaded flange adaptor can be fitted, with a 4-inch to 3-inch conversion described.

Available Configurations

Pneumatic interlock valve
Internal threaded connection
Threaded flange adaptor / 4-inch to 3-inch conversion

Technical & Ordering Data

Nominal size	80 mm
Body material	Aluminium alloy
Connection	Internal NPT thread; optional flange conversion
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	146 mm
Thread sizes shown for the family	3-inch NPT / 4-inch NPT

80 mm vapour recovery adaptor valve — Pneumatic interlock valve — Pneumatic interlock valve

80 mm vapour recovery adaptor valve — Internal threaded connection — Internal threaded connection

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm vapour recovery adaptor valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.
Select the 3-inch or 4-inch connection explicitly; the same source photograph and dimensional sketch cover both variants.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-210 — 100 mm vapour recovery adaptor valve

SIMEI FT-VR-210

100 mm vapour recovery adaptor valve

Quick-connect vapour adaptor mounted low on the tanker near the unloading point to control vapour entering and leaving the tank. Coupling can operate an interlock that controls the combing vent.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
An installed pneumatic interlock valve allows the recovery coupling to control the vapour-recovery system.
Lightweight aluminium-alloy construction.
Cast aluminium-alloy main body with stainless-steel internal shaft components.
Internal threaded installation; a threaded flange adaptor can be fitted, with a 4-inch to 3-inch conversion described.

Available Configurations

Pneumatic interlock valve
Internal threaded connection
Threaded flange adaptor / 4-inch to 3-inch conversion

Technical & Ordering Data

Nominal size	100 mm
Body material	Aluminium alloy
Connection	Internal NPT thread; optional flange conversion
Operation	Pneumatic interlock via recovery coupling
Nominal pressure	0.4 MPa; adaptor family table
Temperature range	−40°C to +50°C; adaptor family table
Seal material	Confirm before quotation
Internal accessories and springs	Stainless steel; adaptor family statement, grade not specified
Drawing overall height	146 mm
Thread sizes shown for the family	3-inch NPT / 4-inch NPT

100 mm vapour recovery adaptor valve — Pneumatic interlock valve — Pneumatic interlock valve

100 mm vapour recovery adaptor valve — Internal threaded connection — Internal threaded connection

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery adaptor valve — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm family pressure and temperature ratings for the quoted configuration.
Confirm mating connector, gasket material and interlock requirements.
Select the 3-inch or 4-inch connection explicitly; the same source photograph and dimensional sketch cover both variants.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-220 — 80 mm vapour recovery valve with 3-inch coupling end

SIMEI FT-VR-220

80 mm vapour recovery valve with 3-inch coupling end

Provides a compact quick-coupling vapour connection with an internal threaded pipe connection.

Technical details

Main features

Oxidation-treated aluminium-alloy surface improves corrosion resistance.
Cast aluminium-alloy main body.
Stainless-steel internal shaft components.
Source describes a leak-tight connection during loading and unloading.
Internal threaded connection.

Available Configurations

3-inch male coupling end
Internal threaded connection

Technical & Ordering Data

Nominal size	80 mm / 3 inch
Coupling end	3-inch male profile
Pipe connection	3-inch NPT, internal
Overall height	150 mm
Nominal pressure	0.4 MPa; adaptor family table, confirm applicability
Temperature range	−40°C to +50°C; adaptor family table, confirm applicability
Body material	Aluminium alloy
Seal material	Confirm before quotation

80 mm vapour recovery valve with 3-inch coupling end — 3-inch male coupling end — 3-inch male coupling end

80 mm vapour recovery valve with 3-inch coupling end — Internal threaded connection — Internal threaded connection

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm vapour recovery valve with 3-inch coupling end — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Verify pressure/temperature rating, coupling compatibility and leak-test requirement for the actual supplied configuration.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-230 — 65 mm vapour recovery coupler

SIMEI FT-VR-230

65 mm vapour recovery coupler

Quick-connects the vapour-recovery hose to a compatible vapour adaptor valve.

Technical details

Main features

Internal poppet design coordinates with the vapour adaptor.
Brass locking handles provide a secure coupling.
Aluminium-alloy construction.

Available Configurations

Quick connection with brass locking handles
Primary coupling configuration; one source photograph covers 65, 80 and 100 mm sizes

Technical & Ordering Data

Nominal size	65 mm / 2½ inch
Nominal pressure	0.4 MPa
Body material	Aluminium alloy
Handle material	Brass
Temperature range	−20°C to +50°C; verify source typo
Primary drawing height	170 mm
Family outlet sizes shown	2½ / 3 / 4 inch
Seal material	Confirm before quotation

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

65 mm vapour recovery coupler — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm adaptor profile, outlet type, handle arrangement and dimensions for the selected size.
The primary table temperature upper limit prints “+500C”; it is likely a typographical error and requires confirmation.

Engineering Note

The photographs are shared source-family illustrations. They do not establish that every size has identical dimensions or either pictured outlet.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-240 — 80 mm vapour recovery coupler

SIMEI FT-VR-240

80 mm vapour recovery coupler

Quick-connects the vapour-recovery hose to a compatible vapour adaptor valve.

Technical details

Main features

Internal poppet design coordinates with the vapour adaptor.
Brass locking handles provide a secure coupling.
Aluminium-alloy construction.
The alternative hose-tail design is described with a tight sealing structure to prevent leakage and vapour spread.

Available Configurations

Quick connection with brass locking handles
Primary coupling configuration; one source photograph covers 65, 80 and 100 mm sizes
FT-VR-270 — 80 mm / 3-inch hose-tail configuration; confirm the outlet profile and final dimensions before quotation.

Technical & Ordering Data

Nominal size	80 mm / 3 inch
Nominal pressure	0.4 MPa
Body material	Aluminium alloy
Handle material	Brass
Temperature range	−20°C to +50°C; verify source typo
Primary drawing height	170 mm
Family outlet sizes shown	2½ / 3 / 4 inch
Alternative drawing height	182 mm
Alternative hose-tail diameter	77 mm shown for shared 3-inch / 4-inch illustration
Seal material	Confirm before quotation

80 mm vapour recovery coupler — Alternative hose-tail configuration illustrated for 3-inch / 4-inch couplers; exact size mapping requires confirmation. — Alternative hose-tail configuration illustrated for 3-inch / 4-inch couplers; exact size mapping requires confirmation.

Dimensions & Construction (2)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

80 mm vapour recovery coupler — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

80 mm vapour recovery coupler — Alternative hose-tail configuration: height 182 mm; tail diameter 77 mm shown. — Alternative hose-tail configuration: height 182 mm; tail diameter 77 mm shown.

Confirm Before Order

Confirm adaptor profile, outlet type, handle arrangement and dimensions for the selected size.
The primary table temperature upper limit prints “+500C”; it is likely a typographical error and requires confirmation.
The alternative 77 mm tail dimension is not allocated to a specific nominal size in the source.

Engineering Note

The photographs are shared source-family illustrations. They do not establish that every size has identical dimensions or either pictured outlet.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-250 — 100 mm vapour recovery coupler

SIMEI FT-VR-250

100 mm vapour recovery coupler

Quick-connects the vapour-recovery hose to a compatible vapour adaptor valve.

Technical details

Main features

Internal poppet design coordinates with the vapour adaptor.
Brass locking handles provide a secure coupling.
Aluminium-alloy construction.
The alternative hose-tail design is described with a tight sealing structure to prevent leakage and vapour spread.

Available Configurations

Quick connection with brass locking handles
Primary coupling configuration; one source photograph covers 65, 80 and 100 mm sizes
FT-VR-280 — 100 mm / 4-inch hose-tail configuration; confirm the outlet profile and final dimensions before quotation.

Technical & Ordering Data

Nominal size	100 mm / 4 inch
Nominal pressure	0.4 MPa
Body material	Aluminium alloy
Handle material	Brass
Temperature range	−20°C to +50°C; verify source typo
Primary drawing height	170 mm
Family outlet sizes shown	2½ / 3 / 4 inch
Alternative drawing height	182 mm
Alternative hose-tail diameter	77 mm shown for shared 3-inch / 4-inch illustration
Seal material	Confirm before quotation

100 mm vapour recovery coupler — Alternative hose-tail configuration illustrated for 3-inch / 4-inch couplers; exact size mapping requires confirmation. — Alternative hose-tail configuration illustrated for 3-inch / 4-inch couplers; exact size mapping requires confirmation.

Dimensions & Construction (2)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

100 mm vapour recovery coupler — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

100 mm vapour recovery coupler — Alternative hose-tail configuration: height 182 mm; tail diameter 77 mm shown. — Alternative hose-tail configuration: height 182 mm; tail diameter 77 mm shown.

Confirm Before Order

Confirm adaptor profile, outlet type, handle arrangement and dimensions for the selected size.
The primary table temperature upper limit prints “+500C”; it is likely a typographical error and requires confirmation.
The alternative 77 mm tail dimension is not allocated to a specific nominal size in the source.

Engineering Note

The photographs are shared source-family illustrations. They do not establish that every size has identical dimensions or either pictured outlet.

WhatsApp enquiry Email enquiry

SIMEI FT-VR-260 — Vapour recovery dust cap

SIMEI FT-VR-260

Vapour recovery dust cap

Protects the vapour adaptor valve from dust and surface damage with a quick-connect cover.

Technical details

Main features

Bright orange identification colour makes the vapour-recovery connection easy to locate.
Lightweight reinforced-nylon body.
Push-and-pull opening and closing.
A sealing hole accepts a lock or lead seal.

Available Configurations

Orange cover with locking bar and retention chain
Lock / lead-seal provision

Technical & Ordering Data

Material	Reinforced nylon
Nominal pressure	0.4 MPa
Temperature range	−20°C to +50°C; source typography requires confirmation
Drawing width	170 mm
Drawing height	66.5 mm
Connection size	Confirm before quotation
Seal material	Confirm before quotation

Dimensions & Construction (1)

Drawings are selection references. Confirm dimensions, tolerances and interfaces against the approved drawing before manufacture.

Vapour recovery dust cap — Original dimensional reference; verify dimensions before manufacture. — Original dimensional reference; verify dimensions before manufacture.

Confirm Before Order

Confirm adaptor fit and the pressure rating applicable to a dust-cover assembly.
The temperature table prints “−20~+500C”; confirm the intended +50°C limit.

Engineering Note

Dimensions are reference values from the source drawing, in mm unless stated. Confirm the mating connection, seal compatibility and final approved drawing before quotation.

WhatsApp enquiry Email enquiry

SIMEI ENERGY

Selection and ordering

Send the SIMEI code, quantity, transported medium, operating conditions and mating drawing. Confirm materials, seals, interfaces and operating requirements before ordering.

WhatsApp enquiry Email enquiry

Related engineering

Tank terminal construction Fuel station equipment